This disposable clip is designed for use in a tile leveling system (in conjunction with reusable wedges). It serves two purposes: acting as a spacer to maintain consistent grout lines, and securing the tiles at the same level to prevent lippage (uneven edges) during adhesive curing.
Spread the tile adhesive on the substrate and lay the first tile.
1
Insert Clips
Slide the base of the clip under the edge of the tile so the vertical upright sticks up Place clips approximately 5-10 cm from the corners and at regular intervals along the tile edge.
2
Lay Adjacent Tile
Place the next tile against the clips, ensuring it sits firmly in the adhesive. The clip is now sandwiched between the two tiles, creating a grout joint.
3
Insert Wedge
Insert a leveling wedge through the slot (hole) in the clip. Use leveling pliers to push the wedge in tight until the two tiles are perfectly level with each other.
4
Remove Clips
Once the adhesive has fully cured (typically the next day), remove the clips by kicking them or striking them with a rubber mallet in the direction of the grout line. The clip is designed to snap off cleanly at the base, leaving the grout joint ready for grouting.
5
Application must be carried out in ambient temperatures between +5°C and +35°C.
Installation is to be performed by qualified and trained professionals only.
At dry place, not directly on Sun.
BROCHURE
Click below to access our brochure. For inquiries regarding specific products or custom orders, feel free to reach out to our team directly.
